Kybc Chine Meilleure qualité Pompe centrifuge portable à moteur diesel Pompe à eau auto-amorçante

Informations de base.

Numéro de modèle.	KYBC
Pouvoir	Diesel
Démarrer	Pompe électrique
Taper	Pompe centrifuge
Application	Pompe d'irrigation agricole
Industrie	Pompe mécanique
Médias	Eau ou milieu similaire à l'eau
Performance	Pompe automatique
Théorie	Pompe centrifuge
Délai de livraison	Généralement dans les 15 jours
Nom	Pompe à eau portative pour moteur diesel
Tête de pompe	Auto-amorçant ou autres
Des pièces de rechange	Filtre à huile, Filtre à carburant, Filtre à air, etc.
Standard	FR
Attestation	Ce
Couleur	Standard ou selon les exigences du client
garantie	Garantie d'un an après la livraison
Marque	Chanson Chang
Batterie	12/24 V CC
Forfait Transport	Emballage de caisse en bois
spécification	Une caisse en bois pour une pompe
Marque déposée

>> Product OverviewbrKYBC stationary diesel engine driven self-priming pump is a pump with a novel structure developed on the base of similar technology abroad. The perfect combination of diesel engine and self -priming pump, together with four-wheel mobile trailer and outdoor shelter makes field operation possible, beyond the restriction of climate. The operation can be controlled both manually and automatically.Combined self-priming with non-clogging sewage, possessing the structure of axial-flow outer recirculation, the uniquely-designed pump body and impeller channel, diesel engine driven self-priming pump can absorb and discharge liquid with large particles and continuous fiber impurities, just as self-priming fresh water pump, without using bottom valve and pump container for water diversion. This pump is therefore can be widely used in municipal sewage discharge system as well as flood-fighting and emergency rescues. KYBC movable diesel engine driven self-priming is your best choice among all kinds of diesel engine driven self-priming pumps.Compared with domestic pumps of the same category, diesel engine driven self-priming pump is simpler in its structure, more better at self-priming work and more thoroughly in sewage charging. With its quality indexes taking the leading level in China, it has a good market appeal and promising future.br>>> Model MeaningbrKYBC300-800-14-Dtable border="1" cellpadding="1" cellspacing="1">
>> Scope of ApplicationsbrAmbient temperature ≤50°C, medium temperature ≤80°C, for specific job requirements, 200 °C is allowed.brMedium PH level for cast iron is 6-9, for stainless steel is 2-13.brThe specific weight of the medium is required below 1240kg/m3brSelf-priming lift should be controlled within the range of 4.5~5.5m, the overall length of suction pipes should be no more than 10m(≤10m)Pipe size capacity: the diameter of suspended particle is 50% of the diameter of the pump, and the length of fiber is 5times of pump's diameter.br>>> Working ConditionsbrAltitude: ≤2500mbrAmbient temperature: -25-55°CbrRelative air humidity: 9~95%brSeismic intensity: 7brFlow range: 50~70(l/s)brHead range: 5~70mbrBrands of diesel engine: WEICHAI, DONGFENG INSTITUTION, DONGFENG CUMMINS, WUXI POWER, CHANGFA, JICHAI, YUCHAI, BEINEI etc.br>>> Structure and Operating PrinciplesbrKYBC diesel engine driven self-priming pump is composed of diesel engine, coupling, pump body, impeller, rear cover, mechanical seal, pump spindle, bearing block, imported pump, gas-liquid separator tube, water valve and drain connection. The structure of the pump is shown in the following figure.brPrinciple of operation: the pump body with fluid reservoir inside and the working chamber of the pump, being connected with each other through the reflowing valve on the upper side and circulation valve beneath it, from the axial-flow outer recirculation system of the pump. When the pump stops working, it already has a volume of liquid reserve inside its fluid reservoir, when the pump runs, the liquid inside is ejected upward with the air flow under the function of impeller, then it reflows into the working cavity through the gas-liquid separator tube, at the same time, the gas exhausted out of the pump, which makes the pump vacuumed inside so as to get self-priming realized.br>>> Preparations before Starting PumpbrCheck the fasteners of the joint parts, such as the pump seat, the coupling and the bearing carrier, and make sure that they would not loosen. If any of them get loose, fasten them.brCheck the connecting pipes and make sure that there is gas leakage.brSwitch on the water valve on the top of the pump, add a volume of water, which is no less than 2/3 of the pump volume. Then switch off the water valve. The next time start the pump, never need to do water rejection anymore.brGet the power line of the storage battery routed to the power source, when the diesel engine is power-on, press down the starting button of the meter panel, give it a test run to see if it rotates clockwise(counterclockwise rotation is prohibited).brStarting up: add antifreezing solution to the water tank of the diesel engine, and fill the fuel tank with diesel oil, then add some lubricating oil(labeled10w-40)to the engine. Route the power line of the starter to storage battery and pay attention to the positive and negative poles.>>> Product Imagep>>> Company Information&AdvantagesbrShanghai Kaiyuan provides booster pumps, submersible pumps, sewage pumps, fire fighting pumps, multistage vertical (horizontal) water pumps, diesel engine water pumps, water supply equipment and other pumps. Here we have modern production base of 60000 square meters, and 3000 square meters of office, professional R&D institution and technology team, which makes us a world-class company. At present, we have two factories, one is in Fengxian District, Shanghai City; the other is in Nantong City, Jiangsu Province. So welcome to visit our factory.br>